Amphenol MIL-C-5015 connectors

MS/DS Series

'R' class


Wall Mounting Receptacle

 Specification requirements for greater reliability in a shorter, lighter weight  environmental resistant  connector led to the design of the MS-R.

 This low profile assembly was attained by moving the axial compression nut and  grommet  assembly forward and flash with the rear of the insert.  The silicon rubber  grommet, with its low  coefficient of friction, assures easier threading of wire bundles  and quicker assembly and  serviceability of the unit. Molded webs in each wire hole  insure a moisture barrier around each  wire.

 The addition 'O'ring at the main joint of all MS3106R plugs provide a main joint seal  supplementary to  the interfacial seal, thus insuring of higher degree of reliability when  connector halves from different  sources are employed. MS-R types are  recommended for new design applications.

 Shells:
 Shell component are fabricated from high grade aluminum alloy. All components have  the standard  electrically conductive zinc plated finish with an olive drab chromate after  treatment for corrosion  resistance. Consult Amphenol Daeshin for other plating  options.

 Contacts:
 Contacts are machined from copper alloy for maximum current carrying capacity and  low millivolt  drop.

 Inserts:
 Resilient synthetic rubber insert provide an outstanding moisture barrier, maximum  vibration  resistance and high dielectric strength. Either pin or socket insert can be  pressurized.

 

 

 

 

 

 

 


 
Cable Connecting Receptacle


Box Mounting Receptacle 


Straight Plug


Right Angle Plug